Gas Cylinder Regulatory Compliance

• Grote sealed LED marker lamps and stop/tail/turn lamps are used for high visibility.

• Grote license plate lamps and sealed incandescent reverse lamps.

• Rubber grommet mounted for easy replacement.

• DOT approved reflectors.

top

• 4 legend flip-file aluminum placard with legends as shown on graphic to the right.

• Other legends available.

• Meet DOT specifications for transporting hazardous materials.

• Fade-resistant acrylic paint.

• Stainless steel spring clips to hold legend panels securely in place.

top

• CFR Part 49 requires hazardous material placards on all 4 sides of the vehicle when transporting loads in excess of the minimum quantities specified for placarding.

• Standard mounting of forward facing placards above the cab provides clear visibility and awareness for safety crews.

• Optional mounting of forward facing placards on the front bumper keeps radiator grill free and clear for optimum airflow.

• Side and rear facing placards are evenly spaced where possible.

• Up to 3 rear facing placards are mounted on tailboard.  Placards are not mounted to bottom of lift gate platform.

top

• Anti-slip coating on walking surfaces.

• 97 db Backup alarm.

• 10# ABC Fire Extinguisher installed on drivers side close to the cab.

• DOT approved lighting and reflectors.

• DOT C2 Conspicuity tape applied to sides and rear, exceeding Federal Motor Vehicle Safety Standards.

• 2 hazardous material flip placards standard on each side.  Additional placards available as required.

• 2 wheel chock blocks mounted underside of body on passenger side.

• 3 reflective hazard triangles in convenient storage box stored in cab.

• 2 18" traffic cones installed on removable storage rod next to access gate.

• "This Vehicle Stops at all Railroad Crossings" decal applied to rear tailboard or lift gate.

top